Redmi Note 13 Pro — 446 ppi, 480 dpi (xxhdpi)
Redmi Note 13 Pro is a Xiaomi device whose display works out to roughly 446 dpi, which Android classifies as the xxhdpi bucket. Everything below is derived from the panel's physical resolution and diagonal size, so you can reproduce the numbers with a calculator and a spec sheet.
| Brand | Xiaomi |
| Released | 2024 |
| Panel resolution | 1220 × 2712 px |
| Diagonal | 6.67 in |
| Diagonal in pixels | 2,974 |
| Physical ppi | 445.8 |
| Density bucket | xxhdpi (480 dpi) |
| Density source | Manufacturer's shipped density |
| Scale factor | 3.00× |
| 1 dp in px | 3.00 px |
| dp viewport | 407 × 904 dp |
| Aspect ratio (short:long) | 678:305 |
| Nearest bucket to ppi | 480 dpi |
Density on the Redmi Note 13 Pro
At 446 dpi, one dp equals 2.79 physical pixels on this panel. That scale factor is what the system uses when it picks drawables from your mipmap folders and when it converts the layout values you wrote in dp into the pixels that actually get drawn.
What layout it actually gets
Because Android divides the physical resolution by the density scale, the layout does not see the full 446 dpi pixel grid — it sees a smaller box measured in dp. That is why two phones with very different resolutions can report the same dp width and lay out identically.
Practical notes
If you are designing for this device, author in dp and let the density scale handle the rest. If you are overriding density with wm density, remember that anything far from 446 dpi will make the UI look either oversized or cramped, because you are fighting the panel's native bucket.
Check another resolution
Want the numbers for a panel that is not in the database? The DPI calculator takes any width, height and diagonal.
Open the DPI calculatorOther Xiaomi devices
Specifications last verified 2026-10-20. These are hardware values from the manufacturer's specification sheet; your device's reported density may differ if the ROM overrides it.